Cold immersion,
done properly.

The TECO TK-3000 chiller is thermostatically controlled and cools the water to any temperature you set, down to 5°C. Once your set temperature is reached, it only runs as needed to hold it — so the bath is always ready, with no ice bags required.

Yes. The ice bath is designed for both indoor and outdoor use, year-round. The marine-grade stainless steel and Kebony timber are built to handle the elements outside, while the clean lines and quiet operation make it equally at home in a gym, studio or wellness room.

Quiet. The TK-3000 chiller emits around 54.5 dB(A) at one metre — roughly the level of a quiet conversation or background office noise. The circulation pump is quieter still, comparable to a modern fridge, thanks to anti-vibration mounts and an efficient motor.

The TECO TK-3000 uses a high-efficiency compressor and titanium heat exchanger, drawing around 750–800W when actively cooling. Once your set temperature is reached it only runs as needed to maintain it, rather than continuously, and the fully insulated body and cover help reduce heat gain — keeping running costs low.

We offer a UK-wide installation service to make sure your bath is set up correctly and safely — pricing starts from £650 within 100 miles and £930 within 200 miles, with prices beyond that on application. We also ship worldwide. If your site access is a little tricky, we’re happy to review it and quote individually.

We recommend a level concrete base at least 100mm thick, laid over a well-compacted MOT Type 1 sub-base (min 75mm deep), for stability and drainage. Paving slabs or timber decking are fine alternatives, provided they’re laid on an equally stable, level foundation able to support the bath’s weight when filled and in use. The base should be sized to match the bath’s footprint so it’s fully supported.

The ice bath comes with a 10-year structural guarantee covering the stainless steel body, framework and Kebony timber cladding. Guarantee subject to terms and conditions, available on request.

The tub and exterior surfaces are 316 marine-grade stainless steel, with a stainless steel internal framework for strength and long-term stability. Selected areas are finished with Kebony® timber, a sustainable, high-performance wood chosen for its durability, low maintenance and natural finish — all selected for resilience in every weather, hygiene and longevity.

Each bath is handbuilt to order, with a typical lead time of 12–16 weeks from order. Build slots are limited and scheduled on a first-come basis, and delivery and optional installation are usually scheduled within a week of completion.

All our hot tubs and ice baths are meticulously handcrafted in Dorset, England.

Stainless steel: wipe with a soft microfibre cloth in the direction of the grain. For light marks, a gentle stainless steel cleaner works well; for water spots or limescale, a limescale remover spray can be used, then rinsed with clean water and dried. Avoid abrasive sponges or harsh chemicals. Clean the interior only when fully drained.

Kebony timber: no sealing or oiling is needed — it weathers naturally to a silver-grey patina. If you prefer to keep the original brown, apply a clear UV-protective wood finish once a year. Clean once or twice a year with warm water and mild detergent, and avoid pressure washers.

Each bath is delivered fully assembled and securely enclosed in a custom-built timber crate for maximum protection in transit. Every shipment is fully insured from dispatch to delivery, giving you complete peace of mind.